NinjaFlex 85A 1kg

The original NinjaFlex truly flexible material !   

• Shore Hardness = 85A
• Truly flexible (no fill or layer manipulation required to achieve performance)
• 660% elongation allows for repeated movement and impact without wear or cracking
• Polyurethane composition allows for excellent vibration reduction
• Patented low friction exterior allows for smooth feeding
• Abrasion resistance 20% better than ABS and 68% better than PLA
• Consistent diameter and material properties providing reliable, high quality prints
• Chemical resistant to many materials, including naphtha, ASTM Oils #1-3, petroleum and freon
• Adheres to all standard build platforms without glue or tape
• REACH and RoHS 2002/95/EC Directive compliant

Extruder Temperature:  225°C – 235°C
Platform Temperature: Room temperature – 40°C
Glue and/ or blue painters tape is suggested if not using a heated bed.

Print Speed:
Top and bottom layers: 10-20 mm/ sec (600-1200 mm/ min)
Infill speeds: 15-35 mm/ sec (900-2100 mm/ min)
Layer 2+ use cooling fan if available.

More info here https://ninjatek.com/ninjaflex/